22" Industrial Wood and Metal Bandsaw
YES-22LGZS Industrial
Variable-speed Wood and Metal Bandsaw with Brake
A variable frequency drive speed control with digital readout provides infinitely variable blade speeds for any wood cutting application. Just turn the speed control dial for on-the-fly speed changes. Inverter motor technology takes advantage of 3-phase control using 220 volt, single phase power.
The vertical cutting configuration also makes feeding the work through the bandsaw for intricate cuts easy with plenty of control against the massive cast iron table. This Wood Band Saw is the ideal bandsaw for any wood fabrication work.
Wood and Metal Bandsaw Features
Our metal cuttinging machine series have the advantages of high rigidity, high precision, good precision retention, high production efficiency and convenient operation.
The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.
Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.
Cast iron wheels
If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.
5 HP MOTOR
Much powerful 5 horse power. The advantage is the higher horse power will bring the higher cutting capacity.
Safety mag switch
Keyed lockout safety mag switch adds operator safety and protects motor from overload.
Massive C type blade guide
- 10 point quick-set guide system is accurate and easy to set up.
- A patented blade guide system helps keep the blade perfectly aligned for precise cuts.
Foot brake system
Foot brake with safety electrical lock out delivers quick braking and increased operator control.
Finger protector
Unique short stock feed system keeps hands free from injury.Cast iron table
The enormous 23"x 30" all cast iron table, has the ability to tilt to 45 degrees
-lv5j1w.jpg)
-2r77eq.jpg)
Inverter system
Just turn the speed control dial for on-the-fly speed changes.
There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.
Q Fence Assy
RS Fence Assy
Laser Liner device with Magnetron
6"(150mm) Resaw Plane
LED Light W/ Magnet Seat
-thvuwx.jpg)
Miter gauge fence jig
左右尚有資訊2. A patented blade guide system helps keep the blade perfectly aligned for precise cuts.
3. A foot brake /w power off
4. Quick change blade system.
5. Runs on 220 volt single phase power and has a 5 HP motor.
6. The enormous 23” x 30” all cast iron table /w T-slot x 2 pcs, has the ability to tilt to 45 degrees.
7. Includes a heavy duty rip fence and miter gauge.
8. A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM.
9. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts.
10. Finger protector removes the need to bring your fingers close to the cutting blade and down depending on your depth of cut.
| Model No. | YES-22LGZS |
| Wheel Diameter | 22" (560mm) |
| Throat Capacity(Left of Blade) | 21½" (546mm) |
| Max. Resaw Height | 16"(406mm) |
| Motor Size | 5HP |
| Motor Voltage | 220V / 3PH |
| Blade Capacity | ¼"~1 3/8" (6mm~35mm) |
| Blade Length | 171⅕" (4350mm) |
| Blade Speed(FPM) | 350~3800 F.P.M. |
| Blade Release | Handlewheel |
| Table Size | 23" x 30" (584mm x 762mm) |
| Dust Port | Cast lron |
| Table Tilt | 0°~45° |
| Table Bracket | Cast lron |
| Machine Weight(KGS) | 407 KGS |
| Footprint | 42" x 61" x 86" |
256 bit SSL Encryption