10" Bench Type Wood and Metal Bandsaw
YES-10ZS 10" Bench Type Wood and Metal Bandsaw
- Adjusting the speed of the blade is as simple as turning a dial. The speed is displayed in FPM on a digital display.
- Vertical wood and metal bandsaw features a variable-speed drive which allows you to slow the blade down for cutting metal and speed the blade up for cutting wood.
- A 3-phase motor is used with a power inverter to provide variable speed capabilities on a single-phase power source.
Wood and Metal Bandsaw Features
Our metal cuttinging machine series have the advantages of high rigidity, high precision, good precision retention, high production efficiency and convenient operation.
Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.
Quick release blade tension
A properly tensioned blade is essential for making
accurate cuts and is a prerequisite for making
many bandsaw adjustments. The blade tension is
adjusted by rotating the blade tension lever.
Cast iron wheels
If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.
1 HP MOTOR
Much powerful horse power 1HP than the 10" bandsaw in the market. Almost 10" bandsaw is 1/2" or 1/4" horse power. The advantage is the highr horse power will bring the higher cutting capacity.
Special Dust Collection Design
- Increase dust collection effect
- 1 "dust collection tube
- Easy assembly
- High efficiency
Gear type guide post
- Better than manual type guide post
- Sturdy construction
- Simple operation
- High precision
Inverter system
A Variable Frequency Drive with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM.
Cast iron table
- The table can tilt up to 45 degrees to the right
- Sturdy construction
- 14"x 14"all cast iron table /w T-slot
- Precision ground table
There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.
Q Fence Assy
J Fence Assy
Circle cutting jig
Bakelite Type Bandsaw Blade Guide
Bearings Type Bandsaw Blade Guide
Deluxe Cabinet Stand
Semi-enclosed stand with wheels
Bandsaw Sanding kit
Miter gauge fence jig
左右尚有資訊2. 8" resaw capability
3. Rack and pinion depth of cut adjustment
4. Dynamically Balanced Cast Iron Wheels
5. Co-planar adjustment
6. Quick-release tension adjustment
7. Precision ground cast iron table 14”x14”
8. Variable speed from 150~3000 FPM
9. Max. cutting width :250mm
10. 4" Dust port kit
11. Max. blade width:19mm
12. Stable Cast iron table bracket
13. #7035 Powder-paint Coating
| Model No. | YES-10ZS |
| Wheel Diameter | 10" |
| Throat Capacity(Left of Blade) | 10"(250mm) |
| Max. Resaw Height | 8"(204mm) |
| Motor Size | 1HP |
| Motor Voltage | 110/220V |
| Blade Capacity | ⅜"~ ¾“(6~19mm) |
| Blade Length | 84.5"(2145mm) |
| Blade Speed(FPM) | 150~3000 F.P.M. |
| Blade Release | Quick Release |
| Table Size | 14"x14" (356mm~356mm) |
| Table Type | Cast lron |
| Table Tilt | 0°~45° |
| Table Bracket | Cast lron |
| Machine Weight(KGS) | 40 KGS(W/O stand)/60 KGS(W/ stand) |
| Footprint | 60cm x 45cm x 110cm |
256 bit SSL Encryption