18" Vertical Wood Cutting Band Saw

Add to inquiry box

Production information

YES-18LZ 18" Vertical Wood Cutting Band Saw

18" large bandsaw performs light to medium work loads for hobby shops and small production applications.
Easy to adjust ball bearing guides with 12" resaw capacity and 3 speeds allow you to scroll with fine blades or resaw with wider blades.

Band Saw Identification

Wood Bandsaw Features

The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.

Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.

Quick release blade tension

A properly tensioned blade is essential for making
accurate cuts and is a prerequisite for making
many bandsaw adjustments. The blade tension is
adjusted by rotating the blade tension lever.

Cast iron wheels

If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.

2 horse power motor for wood cutting bandsaw

2 HP MOTOR

Much powerful 2 horse power. The advantage is the higher horse power will bring the higher cutting capacity.

Table bracket and Trunnion

Cast iron table bracket
Aluminum trunnion
Stable struction
Use smoothly

Gear type guide post

Better than manual type guide post
Sturdy construction
Simple operation
High precision

Ball bearing blade guide

Micro-adjustment dual-bearing system
Longer guide and blade life
Double sealed bearings

Cast iron table

The table can tilt up to 45 degrees to the right
Sturdy construction
20"x24" a large work space
Precision ground table
Three-point support system

Three speeds

Blade speeds 1480, 2300, 3260 FPM
Easy adjustment
Cut different materials

Band saw optional accessories

There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.

Q Fence Assy for wood cutting bandsaw — Q Fence Assy

RS Fence Assy for wood cutting bandsaw — RS Fence Assy

Laser Liner device with Magnetron for wood cutting bandsaw — Laser Liner device with Magnetron

Miter gauge fence jig for wood cutting bandsaw — Miter gauge fence jig

First, for added stability and overall performance, we replaced the aluminum drive wheels with fully balanced cast iron wheels, which are equipped with vulcanized rubber tires.

Second, we have added an effective and easy coplanar adjustment that ensures both your wheels are cutting on the same plane, all the time.

This spacer/shim adjustment is found on the top drive wheel. This unit features a powerful 2HP fully enclosed motor & a spacious 17 3/4" x 17 3/4" precision ground cast iron table with a 6" steel wing extension to the left of the table.

The table tilts 50 degrees left and 10 degrees right & has a standard t-slot miter gauge. The top & bottom doors are hinged for easy access & the bottom wheel features a heavy bristle brush to eliminate sawdust build up.

Large easy-to-use hand wheels provide extra smooth adjustments & the tension adjustment is found at the top of the unit.

左右尚有資訊

Model No.	YES-18LZ
Wheel Diameter	18"
Throat Capacity(Left of Blade)	17⅝"(448mm)
Max. Resaw Height	12" (305mm)
Motor Size	2HP
Motor Voltage	220V
Blade Capacity	⅛" - 1" (3mm~25mm)
Blade Length	133" (3378mm)
Blade Speed(FPM)	1480 , 2300 , 3260
Blade Release	Quick Release
Table Size	20"x24"
Dust Port	Cast lron
Table Tilt	0°~45°
Table Bracket	Cast lron
Machine Weight(KGS)	175 KGS
Footprint	41"x 29-1/2"

Advantages

Specifications