18" Heavy Duty Floor Type Wood Bandsaw
YES-1816L 18” Heavy Duty Floor Type Wood Bandsaw
- The application of YES-1816L bandsaw is only limited by your imagination. Use it to cut curves, saw out joints, make straight rip cuts, slice veneers and break down blocks. No other sawing machine is as versatile as a bandsaw.
- YES-1816L is built for work. If you are building furniture, making veneers, cutting down blocks or anything else, it is a perfect machine for you. This versatile bandsaw has all the mass and power you will probably ever need.
- YES-1816L is a performance bandsaw. The 2.75 powerful motor provides all the power you need to complete a huge range of bandsawing tasks and is perfectly balanced to the build of YES-1816L. This results in balanced and effective performance, free of vibration.
Band Saw Identification
Wood Bandsaw Features
The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.
Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.
Blade tension hydraulic system
- Hydraulic saw band tension system makes the saw blade tension value clear and easier to adjust.Quick release blade tension lever
- Blade tension handwheel
- Hydraulic scale
Cast iron wheels
If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.
2.75 HP MOTOR
Much powerful 2.75 horse power. The advantage is the higher horse power will bring the higher cutting capacity.
Table bracket and Trunnion
- Cast iron table bracket
- Aluminum trunnion
- Stable struction
- Use smoothly
-wxprsx.jpg)
-maxw8r.jpg)
Dust collection system
- Patent dust collection design
- Increase dust collection effect 90%
- Easy adjusment
S type Ball bearing blade guide
- All adjustments can be made with one 3mm Allen wrench
- 1-1/4" blade is available
- Patented product
- Ceramic guide is optional
Cast iron table
- Tilt up to 45 degrees to the right
- Sturdy construction
- 20"x24" a large work space
- Precision ground table
- Three-point support system
Two speeds
- Blade speeds 2800, 3950 FPM
- Easy adjustment
-k3vepl.jpg)
Foot brake system
- Foot brake with safety electrical lock out delivers quick braking and increased operator control.
There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.
Q Fence Assy
RS Fence Assy
Laser Liner device with Magnetron
6"(150mm) Resaw Plane
LED Light W/ Magnet Seat
-thvuwx.jpg)
Miter gauge fence jig
左右尚有資訊• Hydraulic saw band tension system makes the saw blade tension value clear and easier to adjust.
• For the safety part, in addition to the emergency stop button on the control panel, a patented foot brake system is also added, and the height-adjustable blade guard covers the saw blade to reduce the exposure of the saw blade.
• The patent dust collection system design of the machine can effectively remove the wood chips by the dust collector and reduce the bad influence to the lungs caused by the wood chips flying in the air when the machine is operated.
| Model No. | YES-1816L |
| Wheel Diameter | 18" |
| Throat Capacity(Left of Blade) | 17⅝"(448mm) |
| Max. Resaw Height | 16"(406mm) |
| Motor Size | 3HP |
| Motor Voltage | 220V |
| Blade Capacity | ¼"~1¼" (6~32mm) |
| Blade Length | 143"(3630mm) |
| Blade Speed(FPM) | 3000 ↑ |
| Blade Release | Hydraulic |
| Table Size | 20"x24" |
| Dust Port | Cast lron |
| Table Tilt | 0°~45° |
| Table Bracket | Cast lron |
| Machine Weight(KGS) | 180 KGS |
| Footprint | 104 x 69 x 192cm |
256 bit SSL Encryption